RM Solar S Class 20 Pro Manual de instrucciones descargar pdf (Pagina 86)

Product Guarantee

RM Solar Products are guaranteed by RM Solar Ltd as follows:

Thermal Solar Panels (Performance) - S Class 20 Only 20 Years

Thermal Solar Panels (Manufacture & Corrosion) - S Class 20 Only 20 Years

Thermal Solar Panels (Manufacture & Corrosion) - S Class 10 Only 10 Years

Pump Station, Controller & Heat Exchanger 1 Years

Other RM Solar Products 1 Years

In all cases from the day the system was installed & commissioned.

The Guarantee is conditional upon:

• The solar system is installed by an approved RM Solar installer in accordance with recommended

RM Solar techniques & practices, and is serviced in line with our recommendations, and a full

service history is recorded.

• The installation is paid for in full.

• Customer completing the registration form available at the RM Solar website within 28 days of

installation.

• RM Solar being notied of any circumstance giving rise to a claim hereunder within 28 days of

such circumstance arising.

The Guarantee DOES NOT cover:

• Hot water cylinders and thermal stores, which are separately guaranteed by their own

manufacturers.

• Workmanship which is separately guaranteed by the installer.

All statutory rights are not effected by this guarantee and every subsequent owner of the property at

which the thermal solar installation is installed will be recognised hereunder RM Solar Ltd.

Maintenance

These requirements are recommended by RM Solar Ltd and must be adhered to and must be logged

in the service records. Any failure to do so will nullify any manufacturers guarantees, and possibly

installer guarantees. In addition these requirements are separate from any regime for the prevention

of legionella.

The following checks should be carried out at least once every 12 months:

• Visual inspection for weeps, leaks, and uid escapes

• Manually operate all valves and pumps to ensure they are working correctly

• Visual inspection that system pressure has not dropped into the red zone

• Visual inspection that ow gauges indicate correct ow levels

• Visual inspection that there is no damage to panels or xings, this can be done from ground level

• If there is pre heating used, regular checks of the heating system for the nal heated cylinder

should be made

• Check the pre-charge of the expansion vessel(s)

• Check the whole system for signs of corrosion

• Test glycol with approved testing kit

• Visual inspection that all insulation is in good condition and not becoming brittle or cracked

• If vacuum panels are used, check that the vacuum guage shows that there is still sufcient

vacuum, the pointer should be in the green zone.

Storage vessels should be checked in accordance with manufacturers recommendations.

Section 8 - Commissioning & Maintenance

1 2 ... 81 82 83 84 85 86 87 88

Comentarios a estos manuales

Sin comentarios

RM Solar S Class 20 Pro Manual de instrucciones Pagina 86

Comentarios a estos manuales

Relacionado con productos y manuales para No RM Solar S Class 20 Pro