RM Solar S Class 20 Manual de instrucciones descargar pdf (Pagina 33)

33 34

6.4.5 Attach the angle irons (1) to the lower support batten at equal distances using 3

screws, 4x30 (20). If more than two panels are to be installed, t the rst and the last

angle, tighten a cord between them and place the rest of the angle irons along the

cord.

6.4.6 Attach the lower wooden slat (2) with the cut off edge placed toward the panel as

shown. Use 4x30 (20) screws. NOTE: The slats in the in – roof installation set are

longer than the ones in the extension set. The slats of the installation set should be

placed on the left and right side of the extension slat (For 3 Panel Kit Only).

Note:

Before the side, middle and top ashing part is installed make sure that you have:

- Pressure tested the connections of the panels.

- Placed the temperature sensor in the panel.

Once the ashing kit is nished you will either not be able to do these tasks, or be able to do them

with great difculty.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 67 68

Sin comentarios

RM Solar S Class 20 Manual de instrucciones Pagina 33